November Revamp: Trivets

This post is revamped from all the way in 2011. I made trivets having just moved into a school dorm apartment which had a kitchen, so it appears history is repeating itself since I’ve made some trivets to go with my new kitchen in my first real-person apartment. I did the curtains first, and built/painted furniture to bring down some of the colors from the curtains. When all was said and done I still had some curtain fabric left over, and some fabric from the cushions on the chairs, so I did now what I did then and made a set of trivets for my new kitchen.

IMG_4540

This project was originally inspired by a trivet we had at home as a child. My mom had gotten it from a friend a long time ago, and I reverse engineered the process to figure out how to do it. Since then I’ve done it many times, and so I’m revisiting my tutorial to share the technique, because it’s fun and easy, and really cute.

IMG_4536

Because bottle caps are so easy to gather and recycle, the effective cost of this project comes down to the fabric- which I already had because of the curtains. Basically what you need are a sewing kit, so a needle, thread, and something to cut the thread with, and the bottle caps and fabric.

IMG_4438

You’ll be essentially covering the bottle caps in fabric, creating little fabric “yo-yo’s” which you’ll then sew together. For a simple circle trivet you’ll need 19 bottle caps. More if you want to make it longer, or a larger size.

IMG_4492

Cut out a nice circle of fabric, with maybe a 1″ larger diameter than a bottle cap.

IMG_4439

Your circle does not have to be perfect. Almost none of mine were. It doesn’t matter anyway, because (in a technique similar to these Fabric Yo-yos from About.com) you’ll start by stitching loosely around the edge in a circle.

IMG_4450

Flip your fabric over, and put your bottle cap on it, top down. Start to pull on the thread, cinching in the stitches.

IMG_4453

Pull the thread tight, and if you feel the need to, stitch a second round in the bottle cap, to secure the “yo-yo”. Here’s a finished one.

IMG_4454

The front of your bottle cap should be covered in one smooth, nice looking layer of fabric.

IMG_4456

Wash rinse repeat however many times you need to until you have enough fabric covered bottle caps for the trivet you want. You may decide to lay them out before you start stitching to make sure you like the final result. I usually do.

IMG_4492

Start sewing together your bottle caps. I use a simple running stitch, adjusting tension wherever I need to to make the fabric lay properly. Sorry I didn’t stitch this in black so you could see it better- I didn’t want to have to unpick my stitches and re-do the whole project later.

IMG_4497

The stitching process can be a little bit tedious but it is really rewarding to watch the pieces build together into something recognizable.

My one piece of real advice is to make sure you don’t miss any seams- think of each piece as if it were a hexagon, and make sure that even the corner pieces have at least three seams connecting them to each other. This will give you a really solid trivet. The back should look like this.

IMG_4519

The finished trivet from the top will look like this.

IMG_4520

Of course I am nothing if not thorough, so I made a set of three with different patterns. I think the striped one is my favorite!

IMG_4536

 

Advertisements

Chic Geometric Drop Earrings

I was inspired by a pair of earrings I saw on a girl in an elevator this week, and felt like I could really use a similar pair.

IMG_4489

… then I made two pairs. Viola.

IMG_4484

I am really in love with the pearl and copper ones especially.

Cross Stitch Tin for my Embroidery Thread

Looks like today I’m hitting the 2/5 mark for my fall 2015 to-do list!

IMG_4427

I finally finished stitching the top of my embroidery thread tin, a project which was originally inspired by this

tumblr_m1batuynTj1qb4qido1_500

and subsequently inspired by these bangles.

IMG_3564

Using my experience from the bangles project, I set out to embroider the top of the tin, so that there would never again be any question as to what was meant to be stored inside.

IMG_4381

First I set out a grid in pencil, and then marked over it in permanent marker.

IMG_4389

Then I realized that I didn’t like the pattern which I had started with and so chose a different pattern (one of the rosebuds from this pattern, if you’re curious. I’ve also got another project using this pattern in the works so you’ll see it again soon!)

2015-10-16 13.57.41

Then I drilled the holes, having realized that I *actually* wanted the new pattern approximately two stitches lower on the lid of the tin than they were. It was a process. I had some trouble getting the holes to land precisely on the grid marks, though I did try really hard. It occurred to me as I was finishing the stitching that I should have just used the drill press to make the holes instead of a hand held drill. Learn from my mistakes people! a) Make sure the pattern you choose is the pattern you *actually* want and don’t use permanent marker until you’re certain. Maybe then don’t use permanent marker. More on that later. b) use a drill press if you have access to one! I didn’t and that was stupid.

2015-10-16 13.57.38

The insides of your holes will be sharp. Consider using a dremel to cut them down, but be aware that this will leave marks on the inside of your tin. *The more you know!*

2015-10-16 16.30.09

Also, washing off the permanent marker was a pain. It did come off with nail polish remover since it is an alcohol based ink, but it also took off a good section of the “finish” on the tin, making the area around the stitching much shinier.

IMG_4427

When all is said and done you can only sort of tell so it’s fine. The stitching process itself was fairly painless. I used the full 6 strands of the thread to get fuller stitches, and while the insides of some of the holes were sharp enough to sheer the thread, most of the time it wasn’t an issue.

IMG_4391IMG_4395IMG_4398IMG_4403IMG_4411IMG_4417IMG_4420IMG_4419IMG_4422

As you can see I got pretty excited about the stitching process.

IMG_4422

One other interesting thing about the process was that I did a lot of bad-technique backtracking in order to make the back side of the piece look decent.

IMG_4430

I tried to make all the stitches run the same way. I didn’t want it looking messy because you can definitely see both sides, so the back is just as important as the front.

IMG_4428

My thread is so pretty! Nothing quite like seeing a rainbow gradient. No question about what this box holds now, either!

IMG_4427

I love using old techniques in new and surprising ways!

October Revamp: Sweater Pillows

While I made these truly adorable pillows a few years ago, I didn’t exactly have a sewing machine. Or a color scheme. Or any plan at all.

IMG_5306

Three years later I’ve moved into my own place and I finally have all three of those things available, so I decided now was finally the time to re-visit this idea and talk about it a little more in depth.

IMG_4405

The first thing I grabbed was these sweaters from goodwill ($5 total, you guys.) I also had pillow forms already, so my total cost for project was $5 ($1.66/pillow if you will)

2015-10-16 18.10.22

Honestly, this project is so simple if you have a sewing machine, you guys. All you have to do is remove the seams so that you end up with a vaguely square shape.

2015-10-16 18.42.28

Knits stretch, so it doesn’t matter if your fabric is a little narrower than your pillow form as long as they will stretch to fit.

2015-10-16 18.39.02

Mine certainly did. I had 0 problems fitting the pillow forms into my pillow cases once I’d sewn the two sides together (leaving a hole for stuffing, which I totally didn’t forget to do at all on the first pillow nope no way)

IMG_4407

They’re so fun! They match my decor perfectly, and they’re actually really comfy. I feel very cozy in my bed now.

IMG_4406

As you can see, I’ve got some variety. I switched it up by making the two large pillows each have the same back and front, so I have two pillows with turquoise in them instead of just one. I sleep on the little one so I made sure there was a “real pillowcase” side to him for comfort.

IMG_4409

In order to vary it up a bit  (and not totally because I sewed it wrong the first time) I used the “wrong side” of the teal sweater for one of the pillows, and the “right side” for the other so they match but they don’t match.

IMG_4408

The little guy is also special because of the pattern of the knit. I’m a lot in love with these new pillows and they go really well in my new room.

No! My First Irreverent Cross Stitch

Just a quick project today, I found this really great frame at Goodwill and I just had to join in the tradition of irreverent embroidery. Because irreverent embroidery is awesome.

IMG_4384

This is not my first foray into the intersection between traditional, demure, and feminine mediums and modernisms, and I’m sure it won’t be the last. Either way I’m kind of in love with this new piece of art!

Pearl and Wood Earrings

Things are settling down for me a little bit, and I finally got to unpack my beads, so I was able to make some really fun earrings for a friend’s birthday. I think I mentioned this idea in this post, actually.

IMG_4374

My friend makes these lovely wooden post earrings with knots from natural wood. They’re so fun, but I saw the following image on Pinterest and I thought I could definitely do something different and fun with them!

bc3057c813afd9862f4a8bfbf67f8616

I can’t decide which I like better, the white pearls or the brown ones.

IMG_4375

Here’s a photo including the back side of these last earrings

IMG_4378

The glass pearls and the wood tones really work well together!

September Revamp: To Do List

Last month’s re-vamp post in many ways inspired this one. If you recall, it was based on a project which I had chosen to include in a to-do list in 2012. I usually don’t make my crafty to-do lists public, unless I have some great inspiration images or I’m in a period of unusual transition in my life. I seem to be meeting both of those criteria this month, since I’m moving into a new apartment next month and I have some really fun and interesting ideas I want to share with you. As per usual, I found most of my ideas on Pinterest.

bc3057c813afd9862f4a8bfbf67f8616

A friend recently gave me some lovely wood pieces and I’m definitely inspired by this combination of wood and pearl. I’m hoping to find a good way to bring out the natural beauty of the wood in a few pairs of earrings.

tumblr_m1batuynTj1qb4qido1_500

There is another piece I have in mind inspired by this bracelet (which inspired these bracelets). I am hoping to drill holes in the tin I currently store embroidery floss in, and plan to embroider a traditional flower pattern using those holes. I’m pretty excited about the idea.

IMG_3292

I think I’m going to follow up on this pair of earrings from April by making a second pair of puffy geometric shapes, maybe triangles. I’ll have my craft supplies and my beads back again this weekend so I will be able to really dive into something like this again.

garden-stone8_thumb

This project is not exactly what I plan to do, but it has a lot of similarities. I have a lot of really really lovely broken china from work, and when I move into my new place I’ll be acquiring a three level rolling cart. I plan to mosaic the tops of the shelves and make it a nice addition to our kitchen with some plants ect. on it.

img_0413 - Copy luv final - Copy

And finally, I have fallen in love with the idea of making my own face scrubbers and dish scrubbers, and as soon as I’m in my own apartment I intend to do just that. I actually already have the cotton to do these projects, for the most part, so they should be a snap to churn out, and super useful!

I only ended up completing 3 of the 5 projects I included in the first to-do list. This is pretty par for the course; there are always ideas which seem great to me at the time but don’t really have a place in my life/don’t end up coming to fruition because I lose interest in them. I’m sure this list will be no different, but my goal is to complete at least half of these projects by the end of the year. I will periodically come back to update this list with links and images to the completed projects, as I have now done with the old list from 2012.